Monitoring MQTT Connection

Monitor MQTT connection status, supporting MQTT5 and MQTT3.1.1 protocols.

Protocol used: mqtt

tip

To check if topics can be subscribed to normally, HertzBeat will subscribe to a topic and then immediately unsubscribe; to verify if messages can be published correctly, HertzBeat will send a test message to a topic (if the test message parameter is empty, this check will not be performed).
Please ensure that these operations will not affect your system.

Configuration Parameters

Parameter Name	Parameter Description
Target Host	The monitored target's IPv4, IPv6, or domain name. Note ⚠️: Do not include protocol headers (e.g., https://, http://).
Task Name	The name of this monitoring task, which needs to be unique.
Port	The port where the MQTT service is open, default is 1883.
Protocol Version	The MQTT protocol version, supporting MQTT5 and MQTT3.1.1.
Connection Timeout(ms)	Connection timeout in milliseconds, default is 6000 ms.
Client Id	MQTT client ID, default is hertzbeat-mqtt-client.
Topic	The topic to be monitored.
Test Message	Message content used to test whether a topic can be published to normally (optional; if empty, canPublish will always be false).
Username	MQTT authentication username (optional).
Password	MQTT authentication password (optional).
Intervals	Interval for periodic data collection, in seconds; the minimum interval that can be set is 30 seconds.
Binding Tag	Used for classification and management of monitoring resources.
Description	Additional notes to identify and describe this monitoring task, users can leave notes here.

Collected Metrics

Metric Set: Summary

Metric Name	Unit	Metric Description
responseTime	none	Response time
canPublish	none	Whether messages can be published to the topic normally
canSubscribe	none	Whether the topic can be subscribed to normally